B206 experiencing control feedback from inputs with either the cyclic or collective. To be clear when an input is made with the cyclic there is a corresponding control surge on the collective and vice versa. Servos have been checked, pump/reservoir, filter/bypass as well. Control mixer and rod ends checked. Anyone with a similar issue please share the remedy.
There is feed back from the cyclic and collective controls when either has input, sometimes severe. To understand when either control has input the other generates an unwanted input. Servos have been changed, hydraulic pump & reservoir, filter and bypass as well as the control mixer, rod ends inspected. Next up is the swashplate. Has anyone experienced this issue and corrected it ?