XIIGage 31 Report post Posted February 12 Are formulas provided on the mechanical and mathematics sections?Yes, formulas are given to you. Quote Share this post Link to post Share on other sites
future_aviator 1 Report post Posted February 20 I am a 27 year old, non-prior service, civilian applicant with no flight hours building my WOFT packet. I benefitted so much from lurking this thread/forum and I just took the SIFT about 2 hours ago and wanted to post my experience with the test so others can take what they want from it and possibly benefit as well. I'll try and put everything I can remember. I passed with a 61. I am very happy with this score. I've been studying casually for about 1-2 months. Below are the study guides I used, my summary of the test and my stats. Study Guides: The FAA Rotorcraft Manual, Barron's Military Flight Aptitude, Arco's Military Flight Aptitude, 2018/2019 ASVAB for dummies, and the blue and red study guides with the helicopter on the from from Amazon, cram.com flash cards Simple Drawings I answered 98/100 with 3-4 mistakes. 5 drawings are presented in the middle of the screen, you click the answer, and it automatically loads the next 5. Hidden Figures 19/50 with 1 mistake. I didn't feel too great about the amount that I got done. Arco's was probably the closest to the look of the figures. I was given the same 5 figures and they were presented along the bottom of the screen with the new puzzle presented at the top. You click your answer and it automatically goes to the next question. Aviation Information This was pretty much as expected and followed along the same outlines as most of the other posters here. I got a lot of flight control questions as well as some of the following: Induced Flow Translating Tendency What causes Slip and Skid Payload Night Scanning Dissymmetry of Lift Coning Semi rigid vs Rigid Tandem Rotors Temperature Humidity Air Density Altitude and how they pertain to efficiency IM SAFE method Questions like "What is an Army Utility Helicopter" and then presented with different air frames (UH) Basic Aerodynamics (AoA, AoI, Lift, Thrust, Drag, Weight) G air space (wasn't prepared for this) Overall it was pretty much as expected. Would've been fine just reading the FAA rotor craft hand book but the study guides definitely helped. Spatial Apperception The pictures on this one were a little blurry. Wasn't too happy with the layout because of the blur. I got an airplane with just the land and water layout (no helicopter or rock involved). Used all of my study guides to prepare for this one. It was closest to ARCO's practice test. Reading Comprehension One paragraph with four multiple choice questions. I didn't study for this one and it felt pretty complicated. Just choose the answer that can definitely be determined based on the reading. There are a few that will be kind of right and one that will be definite. Try your best to choose the definite. Math Skills Test Thought I was more prepared for this than I actually was. This is the only subtest that I got booted out of. The ones that threw me off were the radical expressions (most of my questions) and geometrical questions. If I could re take my exact test I'd study negative exponents, radical expressions, spheres, cubes, and triangles. Its almost like the test new my weakness : [ Also make sure you're good on probabilities. For example, if you roll a pair of die twice, what is the probability that you'll roll a 12 and then a 7? Mechanical Comprehension Questions about stress types (compression, tension), fluid dynamics, weight, mass, newtons, joules, friction, force, newton's laws, and timing. ASVAB for dummies was my main guide on this one. Overall happy with my 61 as I wanted anything above 60. Honestly felt like I was tanking it so that was a nice relief. I always wondered reading through here how people possibly got through 90+ of the simple drawings but that was actually the easiest part. Also thought I'd be totally screwed on hidden figures but I just drilled them as much as I possibly could and right before I went into the MEPS. I got about as many as I expected. Let me know if you have any other questions! My stats: Civilian; Non-Prior Service; No flight-hours Age: 27 GT - 134 (97th percentile) SIFT: 61 APFT: TBD LOR: TBD (none yet - living in San Diego area with no knowledge of units or anything around me so if you might be able to help point me in the right direction I would be extremely grateful!!!) Flight physical: TBD GPA: Associate's Degree 3.98 GPA working towards my bachelor's Quote Share this post Link to post Share on other sites
Pmortillo 6 Report post Posted February 21  I am a 27 year old, non-prior service, civilian applicant with no flight hours building my WOFT packet. I benefitted so much from lurking this thread/forum and I just took the SIFT about 2 hours ago and wanted to post my experience with the test so others can take what they want from it and possibly benefit as well. I'll try and put everything I can remember. I passed with a 61. I am very happy with this score. I've been studying casually for about 1-2 months. Below are the study guides I used, my summary of the test and my stats. Study Guides: The FAA Rotorcraft Manual, Barron's Military Flight Aptitude, Arco's Military Flight Aptitude, 2018/2019 ASVAB for dummies, and the blue and red study guides with the helicopter on the from from Amazon, cram.com flash cards Simple DrawingsI answered 98/100 with 3-4 mistakes. 5 drawings are presented in the middle of the screen, you click the answer, and it automatically loads the next 5. Hidden Figures19/50 with 1 mistake. I didn't feel too great about the amount that I got done. Arco's was probably the closest to the look of the figures. I was given the same 5 figures and they were presented along the bottom of the screen with the new puzzle presented at the top. You click your answer and it automatically goes to the next question. Aviation InformationThis was pretty much as expected and followed along the same outlines as most of the other posters here. I got a lot of flight control questions as well as some of the following: Induced FlowTranslating Tendency What causes Slip and SkidPayloadNight ScanningDissymmetry of LiftConingSemi rigid vs RigidTandem RotorsTemperature Humidity Air Density Altitude and how they pertain to efficiencyIM SAFE methodQuestions like "What is an Army Utility Helicopter" and then presented with different air frames (UH)Basic Aerodynamics (AoA, AoI, Lift, Thrust, Drag, Weight)G air space (wasn't prepared for this) Overall it was pretty much as expected. Would've been fine just reading the FAA rotor craft hand book but the study guides definitely helped. Spatial ApperceptionThe pictures on this one were a little blurry. Wasn't too happy with the layout because of the blur. I got an airplane with just the land and water layout (no helicopter or rock involved). Used all of my study guides to prepare for this one. It was closest to ARCO's practice test. Reading ComprehensionOne paragraph with four multiple choice questions. I didn't study for this one and it felt pretty complicated. Just choose the answer that can definitely be determined based on the reading. There are a few that will be kind of right and one that will be definite. Try your best to choose the definite. Math Skills TestThought I was more prepared for this than I actually was. This is the only subtest that I got booted out of. The ones that threw me off were the radical expressions (most of my questions) and geometrical questions. If I could re take my exact test I'd study negative exponents, radical expressions, spheres, cubes, and triangles. Its almost like the test new my weakness : [ Also make sure you're good on probabilities. For example, if you roll a pair of die twice, what is the probability that you'll roll a 12 and then a 7? Mechanical Comprehension Questions about stress types (compression, tension), fluid dynamics, weight, mass, newtons, joules, friction, force, newton's laws, and timing. ASVAB for dummies was my main guide on this one. Overall happy with my 61 as I wanted anything above 60. Honestly felt like I was tanking it so that was a nice relief. I always wondered reading through here how people possibly got through 90+ of the simple drawings but that was actually the easiest part. Also thought I'd be totally screwed on hidden figures but I just drilled them as much as I possibly could and right before I went into the MEPS. I got about as many as I expected. Let me know if you have any other questions! My stats: Civilian; Non-Prior Service; No flight-hoursAge: 27GT - 134 (97th percentile)SIFT: 61 APFT: TBD LOR: TBD (none yet - living in San Diego area with no knowledge of units or anything around me so if you might be able to help point me in the right direction I would be extremely grateful!!!) Flight physical: TBDGPA: Associate's Degree 3.98 GPA working towards my bachelor's   Thanks for the post, it was helpful last night/this morning before I was scheduled to take the SIFT. Naturally, the "servers" were down at MEPS, so they made me wait a couple of hours and then told me to reschedule for next Thursday.  The beauty of MEPS continues to treat me well... Quote Share this post Link to post Share on other sites
future_aviator 1 Report post Posted February 22  Thanks for the post, it was helpful last night/this morning before I was scheduled to take the SIFT. Naturally, the "servers" were down at MEPS, so they made me wait a couple of hours and then told me to reschedule for next Thursday.  The beauty of MEPS continues to treat me well...Rough! Good luck next week! Let me know if you have any other questions and Ill try and help the best I can. Quote Share this post Link to post Share on other sites
amby_1986 0 Report post Posted July 24 Where can i find the 250 CRAM flashcards?I didnt find any link for the same? Quote Share this post Link to post Share on other sites
JeffB 0 Report post Posted July 25 I'm preparing to take the SIFT as well. I've found this thread to be of great benefit. Good info posted! Quote Share this post Link to post Share on other sites