Jump to content
Gabriel92

Helicopter Down Wash Procedure

Recommended Posts

Greetings to the Experts in this forum, I am a new learning student wish to know what is meaning of Helicopter Down Wash Procedure, any example of the procedure would be appreciated. Thank you!

Share this post


Link to post
Share on other sites

Down wash Procedure??

Get hose, wet aircraft, use soapy water, wash down. Simples.

As far as a procedure to minimise downwash on approach or departure- it depends on your weight, how much clear area there is before and after your termination point, are there light fixed wing on the ground in the vicinity that you could tip over? Ten points and a Hershey bar if you can do it without anybody seeing.

A slow approach with high power will give the most downwash.

Share this post


Link to post
Share on other sites

You may be confusing terms. Rotor "downwash" on landing is just strong wind that will vary depending on the size and weight of the helicopter. You just need to be aware of who you may be blasting if they get too close to your landing spot. Obviously, you don't want to land on top of someone, and most people understand not to get too close to a landing helicopter.

"Power settling" is a real danger, however. This is when you descend too vertical and too fast through your rotor downwash. The turbulence can disrupt airflow over the blades and affect your lift. That is why a little forward airspeed is necessary when approaching your landing spot. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...