Jump to content

something I learned talking to allison rep

Recommended Posts

had a chit chat with the rep this week, and he mentioned the following,

the new starter seals have a teflon strip in the center that you shouldn't touch, you can oil the splined shaft though, you are to use a bullet to install then also. the fcu and governor can move a bit so center them before tightening so as to help tubing installation. you should bent the tubes to make sure they fit to the unit not loaded up and held down with the B nut. also use the correct torque, make sure the clamp is tight on the tube as they stop a harmonic vibration that can happen in tubes. never touch the #8 oil supply line. as you'll not get it back on correctly in the field.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...